Spindle Mounts

43 mm Euro-Neck Spindle Mount

Rigid aluminium construction. Two M5 tapped holes on the underside of the Euro neck mount accept accessories such as a dust extraction attachment, a dust extraction attachment with hold-down or an engraving depth stop. An 8x45mm keyway and two M5 tapped holes at the rear locate and secure the mount on the Z-axis carriage. The key and M5 countersunk screws are included. Fits routing spindles with a 43mm clamping neck, including models from AMB, Mafell and Suhner.

€24.90*

Details

65 mm CNC Spindle Mount

65mm Spindle Motor Mount Suitable for all Haase machines, custom-built machines and machines from other manufacturers. Length: 99.00mm Width: 84.00mm Height: 32.00mm Spindle mounting diameter: 65.00mm Scope of delivery: 1 x Spindle mount 2 x Parallel keys 4 x Mounting screws

€49.90*

Details

80 mm CNC Spindle Mount

80mm Spindle Mount The rear of the mount features 8 × 45 mm keyways and M5 threaded holes for alignment and installation on the Z-axis carriage. The parallel keys and M5 countersunk screws are also included in the scope of delivery.

€59.00*

Details

Adapter Plate for ELTE Spindles on Haase CNC Routers

Use this adapter plate to fit ELTE high-frequency spindles to AL and CUT2500 series machines. The tongue-and-groove design locates the spindle at the correct angle. Tighten the screws and start machining without further adjustment. Dimensions — length 200mm, width 79mm, height 1 24mm, height 2 13mm, hole diameter 6mm.

€119.00*

Details

Adapter Plate for HSD Spindles on Haase CNC Routers

This adapter plate is required to mount HSD high-frequency spindles on Haase AL-series and CUT2500 machines. Its tongue-and-groove alignment design ensures that the spindle is mounted at the correct angle. Simply fasten it in place without further adjustment. Dimensions: length 250 mm; width 79 mm; height 1: 24 mm; height 2: 13 mm; holes: 6 mm. SCOPE OF DELIVERY Adapter Plate & Parallel Key

€119.00*

Details

Euro Neck Mount for Suhner Router Motors

43mm mount for Suhner router motors An 8x45mm keyway and two M5 tapped holes at the rear locate and secure the mount on the Z-axis carriage. The key and M5 countersunk screws are included. Two M5 tapped holes on the underside of the Euro neck mount accept accessories such as a dust extraction attachment, a dust extraction attachment with hold-down or an engraving depth stop.

€29.00*

Details

Tool Changer Gripper for ISO30/SK30

Tool changer gripper for ISO30/SK30

€49.90*

Details