Miscellaneous

4-Axis Interface Board

4-axis interface board for CNC Routers and CNC control Connect up to four axes to a PC parallel port or a microcontroller-based control system such as a PLC.Supports 4 reference switches and two emergency stop switches.2 relays with two 8 A changeover contacts eachUse a jumper to synchronise the C axis with another axis to run two motors on one axis.Onboard 5 V and 12 V voltage regulators.Only one motor power supply (24–65 V) is required. The board allows flexible system configuration without choosing the number and power rating of the drives at the outset.

€96.90*

Details

Carbon Brushes for AMB (Kress) 800 / 1050 Router Motors (2 pcs)

Carbon brushes for AMB (Kress) router motors 800 and 1050 (2 pieces) After a period of use, which depends on the application, maintenance and other factors, the carbon brushes should be replaced. This product includes a set of two carbon brushes. One brush has a shut-off mechanism that switches off the motor when the brushes are worn.

€14.90*

Details

CNC Touch Plate, Aluminium, 85×85×14 mm | Estlcam, WinPC-NC, CNCgraf

Aluminium CNC Touch Plate for Precise Work Zero Setting and Tool Length Measurement This precision-machined aluminium touch plate establishes work zero and measures tool length on your CNC machine. It works with Estlcam, WinPC-NC, CNCgraf and many other common CNC controllers. It also works reliably with MPCNC systems for accurate workpiece setup. Product details Dimensions 85 × 85 × 14 mm for a range of CNC applications Material High-quality aluminium with a precision-machined surface Cable 1.50 m long for common machine layouts Manufacturing tolerance ±0.05 mm for consistent repeatability Scope of delivery 1× CNC touch plate 1× connecting cable (1.50 m) 1× M5 screw This touch plate simplifies setup and improves routing accuracy. Made in Germany, it is a durable accessory for precision workpiece measurement with Estlcam, WinPC-NC, CNCgraf and similar control software.

€18.90*

Details

Engraving Depth Stop with Floating Slide

Engraving depth stop with floating slide Use an engraving depth stop for fine work with an engraving cutter. For example, when engraving lettering with a 0.2 mm line width, the width varies unless the engraving material is parallel to the machining plane within a few hundredths of a millimetre. Even slight warping of the plate can affect the result.The depth stop mechanically limits how far the cutter penetrates the material. One screw adjusts engraving depth precisely. A second screw and a spring reduce contact pressure on delicate surfaces. Lock the stop in place when routing contours or drilling holes, without removing the assembly.

€239.00*

Details

Hold-Down Clamps for T-Slot Tables

Hold-down clamps for T-slot tables The low profile lets you machine close to the edge of the clamped material while keeping the clamps clear of the spindle. Includes the selected number of hold-down clamps, M6 T-slot nuts (for 8mm slot openings), clamping screws and height-adjustment grub screws.

€7.60*

Details

Houghton Pressmax VE 2660 Cutting Fluid / 1 Liter

Fenella Cutting Fluid This cutting fluid is particularly suitable for the minimum-quantity lubrication systems available in our range. Once the cutting fluid has dried, only a fine white powder remains, which can easily be wiped off with a cloth. !! CAUTION !! Before use, be sure to read the enclosed safety data sheet.

€11.90*

Details

Inductive Tool Length Sensor – Precision Touch Probe

Inductive tool length sensor This sensor is useful when changing tools frequently on a CNC Router. Depending on the control software, it measures the length difference between two tools and/or sets Z zero automatically. The precision probe measures tool length quickly, accurately and automatically.The inductive measurement system achieves an accuracy of ~ 0.01mm The probe head mounting lets you measure even very small, delicate tools without breaking them.The sensor is compatible with common machines on the market.Our AL, Cut2500 and Cut3000-5000 series machines are equipped for use with the sensor. Technical details The inductive tool length sensor is an NPN sensor. The touch button is 29 mm in diameter. Screw the sensor to wood or fasten it to an existing T-slot plate using T-slot nuts. For manual probing, you can also place it loose on the machine table. Compatible with all our routers manufactured from November 2016 onwards. For older machines, the jack socket must be replaced. Specify this when ordering and we will include it at no charge.

€152.90*

Details

NOGA Hand Deburring Kit with 10 Blades

NOGA hand deburring kit with 10 blades An essential workshop kit for cleanly deburring the edges of plastics, steel and aluminium. Scope of delivery - Handle - 5 blades for aluminium - 5 blades for steel

€26.90*

Details

Plug-In Pressure Regulator with Particulate Filter, Water Separator and Semi-Automatic Drain

Plug-in pressure regulator with particulate filter, water separator and semi-automatic drain NW 7.2 plug nipple, G 1/4″ maleNW 7.2 coupling, G 1/4″ male (one-sided shut-off)40 mm WIKA pressure gaugeMeasuring range 0–10.0 bar / 145 psiRear connection G 1/8″Particulate filtration 40 micronsAdjustable pressure range 0.05–9 barMaximum pressure 9.9 barMaximum airflow 2000 L/minOperating temperature 0–60 °C Clean the polycarbonate sight glass with soapy water only. Avoid solvents such as alcohol or trichloroethylene.

€36.90*

Details

Spray-Mount Spray Adhesive

3M Spray Mount spray adhesive Reposition for up to twelve hours after one-sided application or up to two hours after two-sided application. Once cured, the adhesive forms a secure, durable bond that remains flexible as it ages. Fast, secure and practical. Contents 400ml (€44.15 / 1l)

€18.10*

Details

Straight Compressed Air Hose | Max. 20 bar | IMPLOTEX | 8 m

Straight compressed air hose Straight hose 8, TPU polyurethaneD12.5 x 10mm Maximum pressure 20 bar, continuous pressure 10 bar. Stays flexible at low temperatures. Preassembled with safety quick coupling and plug nipple Air connection thread 12.91 mm (1/4 inch)

€27.98*

Details

T-Slot Nuts M6x8

M6x8 T-slot nuts Product details Strength class 8 Finish Plain Material VSTAHL (quenched and tempered steel) Standard DIN 508 Dimensions a: 7.6 mm e: 13.00 mm h: 10.00 mm k: 6.00 mm Additional information Weight 9 g each These T-slot nuts provide reliable, secure fastening to T-slot profiles in machine building and engineering applications.

From €1.48*

Details