CNC Graf
Aluminium enclosure for smc5d-p32
Technical data
5 V power supply
Pulse and direction signals up to 150 kHz
Interpolated motion on up to 5 axes plus X2/Y2 dual drive
USB 2.0 communication (compatible with USB 3.0)
RS485 connection for handwheel or joystick
24 protected inputs and outputs
All inputs on CON2, CON3 and CON4 are optically isolated
Spindle speed via analogue output (requires DAC-INT-10V)
Requires cncGraF Std/Pro (free download)
CAN Expansion DAC for smc5d-m4 pro
Technical data
DIN rail enclosure for control cabinet installation
24 V power supply
CAN communication with smc5d-m4 pro
2 analogue outputs (0-10V) and 2 analogue inputs (0-5V)
Two switches for outputs 1 and 2
Up to four DAC 0-10V modules can be connected to one Central Unit
Speed adjustable via potentiometer
Supports up to 8 analogue outputs and 8 analogue inputs in total
CAN Expansion I/O for smc5d-m4 pro
Technical data
DIN rail enclosure for control cabinet installation
24 V power supply
CAN communication with smc5d-m4 pro
16 optically isolated inputs and 20 relay outputs with LED indicators
Up to six I/O modules can be connected to the smc5d-m4 pro
Supports up to 104 inputs and 124 outputs in total.
smc5d-p32 CNC controller in an aluminium enclosure, including handwheel and cncGraF 7 Pro software.
Complete set
smc5d-p32: Entry-level CNC controllerwith USBThe smc5d-p32 provides reliable, flexible control of CNC machines with up to 5 axes. The integrated USB port makes it easy to connect and operate.Technical dataPower supply 5 VPulse and direction signals Up to 150 kHzAxis control Interpolated motion on up to 5 axes, including X2/Y2 dual driveCommunication USB 2.0 (compatible with USB 3.0)Additional interface RS485 connection for a handwheelInputs and outputs 24 protected portsProtection Optically isolated inputs at CON2, CON3 and CON4Spindle control Spindle speed control via analogue output (requires DAC-INT-10V)Software Compatible with cncGraF Std/Pro (free download available)The smc5d-p32 is a reliable, versatile and easy-to-use introduction to CNC control.Note This listing is for hardware only. Download cncGraF Pro from the manufacturer’s website. Updates within the same Std / Pro edition are free. A one-time charge applies to controller upgrades to a higher edition, such as cncGraF Std to Pro.CNC controller feature comparisonControllersmc5d-m4 prosmc5d-m4 lansmc5d-p32Pulse frequencyUp to 300 kHzUp to 300 kHzUp to 150 kHzNumber of axes65Up to 5X2/Y2 dual driveYesYesYesModular design for DIN rail mountingin a control cabinetYes––LED indicators for inputs/outputsYes––Power supply24 V DCexternal5 V DC external5 V DC external/USB Number of outputs4, expandable to 1242424Optically isolated outputsYesYesYesNumber of inputs8, expandable to 1042424Analogue outputsExpandableto 8 outputs3 outputs3 outputsAnalogue inputsExpandableto 8 inputs––Connection for handwheelYesYesYesFirmware updatesYesYesYesSoftwarecncGraF ProcncGraF ProcncGraF Std/ProInformation is provided without guarantee and may be incomplete.
smc5d-p32: Entry-level CNC controllerwith USB
The smc5d-p32 provides reliable, flexible control of CNC machines with up to 5 axes. The integrated USB port makes it easy to connect and operate.Technical dataPower supply 5 VPulse and direction signals Up to 150 kHzAxis control Interpolated motion on up to 5 axes, including X2/Y2 dual driveCommunication USB 2.0 (compatible with USB 3.0)Additional interface RS485 connection for a handwheelInputs and outputs 24 protected portsProtection Optically isolated inputs at CON2, CON3 and CON4Spindle control Spindle speed control via analogue output (requires DAC-INT-10V)Software Compatible with cncGraF Std/Pro (free download available)The smc5d-p32 is a reliable, versatile and easy-to-use introduction to CNC control.
Note This listing is for hardware only. Download cncGraF Standard from the manufacturer’s website. Updates within the same Std / Pro edition are free. A one-time charge applies to controller upgrades to a higher edition, such as cncGraF Std to Pro.
CNC controller feature comparisonControllersmc5d-m4 prosmc5d-m4 lansmc5d-p32Pulse frequencyUp to 300 kHzUp to 300 kHzUp to 150 kHzNumber of axes65Up to 5X2/Y2 dual driveYesYesYesModular design for DIN rail mountingin a control cabinetYes––LED indicators for inputs/outputsYes––Power supply24 V DCexternal5 V DC external5 V DC external/USB Number of outputs4, expandable to 1242424Optically isolated outputsYesYesYesNumber of inputs8, expandable to 1042424Analogue outputsExpandableto 8 outputs3 outputs3 outputsAnalogue inputsExpandableto 8 inputs––Connection for handwheelYesYesYesFirmware updatesYesYesYesSoftwarecncGraF ProcncGraF ProcncGraF Std/ProInformation is provided without guarantee and may be incomplete.
DAC-INT-10V interface board
Technical data
Connects up to 5 axes to the SMC5D controller
Separate connection for two motors on one X or Y axis (dual drive)
1.2–10 V analogue output for controlling spindle speed or tangential knife stroke speed
Alternatively, adjust speed using a potentiometer connected to the controller.
Handwheel for CNCGraf
The electronic handwheel connects directly to the controller by cable. The controller moves the machine without going through the PC, eliminating positioning delays.
The backlit membrane keypad has metal snap domes for tactile feedback with each press.The handwheel has over 30 keys. Preset functions such as homing, starting a job and pausing are ready to use.The enclosure is sealed and fitted with a magnet.
Handwheel functions
Jog all 5 axes using a single wheel with an optical encoder. Step increments of 0.1mm or 0.01mm are configurable in cncGraF Pro.
Preset functions include homing, moving to work zero, moving to park position, spindle on/off, setting X/Y/Z zero, pump on/off, starting or resuming a job, pausing and aborting.
Assign additional functions to 12 programmable keys. Their insert windows accept interchangeable labels for the keys and fields.
Adjust machining speed while routing.
An emergency stop switch is integrated into the front of the enclosure.
CNC Graf smc5d-m4 controller
This controller uses a 32-bit ARM NXP4337 M4 microcontroller clocked at 204 MHz for fast data transfer over LAN or USB 2.0 (compatible with USB 3.0).
The controller requires an external power supply.
Technical data
DIN rail enclosure for control cabinet installation
24 V power supply
Pulse and direction signals up to 300 kHz
Differential step pulse outputs for noise immunity
Interpolated motion on up to 5 axes plus X2/Y2 dual drive
8 optically isolated inputs and 4 relay outputs with LED indicators
Ethernet (LAN) or USB 2.0 communication (compatible with USB 3.0)
Connection RS485 or CAN for handwheel or joystick
Micro SD card slot
CAN communication between modules
Supports up to six I/O modules and up to four DAC modules
Requires cncGraF v7.1 Pro or later (free download)