Product number:
AMB-FME-P1400DI
Product information "AMB 1400 FME-P DI Router Motor | ER16 Collets | 230 V"
Technical data
- Input power: 1400 W
- Speed range: 3,500–25,000 rpm (software-controlled)
- Clamping neck diameter: 43 mm (Euro neck)
- Collet: 8 mm (standard)
- Weight: 2.4 kg
Features
- External speed control via 0–10 V analogue signal (DI version)
- Full-wave electronics maintain speed under load
- Double-bearing stainless steel motor flange for high cutting forces
- Electronic thermal overload protection
- Fully potted electronics for dust protection
- Original carbon brushes made in Germany with automatic cut-off
- Precision motor shaft bearings for smooth operation
Scope of delivery
- AMB 1400 FME-P DI router motor
- 8 mm ER16 collet
- Collet nut
- 4 m power cable module
- Operating instructions
- Runout test certificate
The 1400 FME-P supports software speed control from 3,500 to 25,000 rpm via a 0–10 V analogue signal. A 0–10 V output on the machine controller is required. This version has no potentiometer for manual speed adjustment.
Informationen zur Produktsicherheit
Related products
AMB 1050 FME-P routing spindle
Features of the AMB 1050 FME-P router motorPower and speed range The motor has 1050 W input power and continuously adjustable speed from 5,000 to 25,000 rpm.Compact design At just 1.7 kg, the slim motor takes up little space and is easy to handle.Industry-standard collet The industry-standard ER16 collet system is available worldwide and gives you a broad choice of tooling.Versatile applications Use in gantry CNC machines, plunge routers, routing fixtures, drill stands and other applications.Carbon brush design Special carbon brushes shut off automatically to protect the commutator. Silicone pads between the carbon brushes and pressure springs damp vibration and extend service life.The AMB 1050 FME-P is a versatile, powerful router motor for professional applications.
Scope of delivery
Router motor
8.00mm ER16 precision collet
Collet nut
Operating instructions
Runout test certificate
Power cable with patented quick-release connector and rubber lead
Speed range: 5,000–25,000 rpm.
Subject to changes and errors.
Versatile Two-Flute Solid Carbide CutterProduct descriptionThe two-flute solid carbide cutter has a fishtail end grind for easy plunging and clean pocket milling. It delivers precise results in wood, plastics and aluminium.Features and benefitsMaterial High-quality solid carbide for strength and long service life.Two flutes Two cutting edges remove material efficiently and produce smooth surfaces.Fishtail grind Makes plunging easier and reduces heat build-up at the bottom of the slot, particularly useful in plastics.Versatility Ideal for machining wood, plastics and aluminium.Precision Clean pockets and accurate cuts.Technical dataCutter type Two-flute solid carbide cutter with fishtail grindDiameter Ø 0.30mm - Ø 3.175mmOverall length [Enter overall length in mm]Shank diameter [Enter shank diameter in mm]Flute length [Enter flute length in mm]Coating [Enter coating if applicable]Example applicationsWoodworking Clean, precise routing in a range of woods.Machining plastics Ideal for plastics prone to melting because the fishtail grind reduces heat build-up.Machining aluminium Good results in aluminium under controlled cutting conditions.Usage notesOverload sensitivity Solid carbide cutters are more sensitive to overload than HSS cutters. The fishtail grind can make the cutter more delicate, so use controlled cutting conditions.Material selection A fishtail cutter is ideal for plastics and other materials prone to melting. A flat-end cutter may be more suitable for brass or aluminium.
Diameter
Overall length
Cutting length
Shank
0.30mm
38.20mm
1.50mm
3.175mm
0.40mm
38.20mm
2.00mm
3.175mm
0.50mm
38.20mm
3.00mm
3.175mm
0.60mm
38.20mm
3.00mm
3.175mm
0.70mm
38.20mm
3.00mm
3.175mm
0.80mm
38.20mm
4.50mm
3.175mm
1.00mm
38.20mm
4.50mm
3.175mm
1.20mm
38.20mm
6.00mm
3.175mm
1.50mm
38.20mm
6.00mm
3.175mm
1.60mm
38.20mm
7.50mm
3.175mm
2.00mm
38.20mm
9.00mm
3.175mm
2.50mm
38.20mm
9.00mm
3.175mm
3.00mm
38.20mm
10.50mm
3.175mm
3.175mm
38.20mm
10.50mm
3.175mm
The AMB 1050 FME-1 DI router motor has 1050 W input power and a speed range of 3,500 to 25,000 rpm. Suitable for plunge routers, routing fixtures, drill stands and gantry CNC Routers.
Technical dataInput power: 1050 WSpeed range: 3,500–25,000 rpm (software-controlled)Clamping neck diameter: 43 mm Collet: 8 mm (standard)Weight: 1.7 kg
FeaturesExternal speed control via 0–10 V analogue signal (DI version)Full-wave electronics for constant speedDouble-bearing stainless steel motor flange for higher cutting forcesElectronic thermal overload protectionFully potted electronics for dust protectionOriginal carbon brushes made in Germany with automatic cut-offScope of deliveryAMB 1050 FME-1 DI router motor8 mm standard colletCollet nut4 m power cable moduleOperating instructionsRunout test certificate
The FME-1 supports software speed control from 3,500 to 25,000 rpm via a 0–10 V analogue signal. A 0–10 V output on the machine controller is required. This version has no potentiometer for manual speed adjustment.
AMB 1050 FME-1 routing spindle
BenefitsHigh power : The 1050 W motor handles demanding routing work.Variable speed : The wide speed range accommodates different materials and cutters.Compatibility : Standard collets support a wide choice of cutters.Reliability : Designed by AMB Elektrik for durability and German manufacturing quality.
The AMB 1050 FME-1 is a versatile, powerful router motor for professional applications.Scope of deliveryRouter motor8.00mm precision collet Collet nutOperating instructionsRunout test certificatePower cable with patented quick-release connector and rubber leadSpeed range: 5,000–25,000 rpm.Subject to changes and errors.
The AMB 1050 FME-P DI router motor has 1050 W input power and a speed range of 3,500 to 25,000 rpm. Suitable for plunge routers, routing fixtures, drill stands and gantry CNC Routers.Technical dataInput power: 1050 WSpeed range: 3,500–25,000 rpm (software-controlled)Clamping neck diameter: 43 mm Collet: 8 mm (standard)Weight: 1.7 kgFeaturesExternal speed control via 0–10 V analogue signal (DI version)Full-wave electronics for constant speedDouble-bearing stainless steel motor flange for higher cutting forcesElectronic thermal overload protectionFully potted electronics for dust protectionOriginal carbon brushes made in Germany with automatic cut-offScope of deliveryAMB 1050 FME-P DI router motor8 mm standard colletCollet nut4 m power cable moduleOperating instructionsRunout test certificateThe FME-P supports software speed control from 3,500 to 25,000 rpm via a 0–10 V analogue signal. A 0–10 V output on the machine controller is required. This version has no potentiometer for manual speed adjustment.
ER16 Collets – Precision and Flexibility for Your Tools Our ER16 collets offer precision and flexibility
for your toolholding system. Product Benefits
High Precision: Runout Accuracy Class II 0,003 - 0,015mm
Wide Clamping Range: Clamping range up to 12 mm
Versatile Applications: For holding cylindrical-shank tools in DIN 6499 collet chucks
Technical Specifications
Standard: 426E
Diameter: Available in various sizes from 1 mm to 12 mm
Optimize your toolholding with our high-precision ER16
collets – an excellent choice for industrial and precision applications!